Image

Cam Locks

  • 7 pin tumbler system.
  • Retrofits from any standard cam lock.
  • Custom cam (locking arm) dimensions.
  • 3 different lock sizes available, 5/8″, 7/8″, 1-1/8″.
  • 10,000 key combinations possible.
  • Low profile discrete installation.
  • Resistant to magnet tampering.
Buy Now!
 

The following part numbers are for the complete lock assembly which includes 2 keys per order and a standard cam size of 1"x1/4" offset. See the next section for additional cam options.

Part Number Lock Size
TCL5803-CAM-NP-01-KA#XXXX 5/8" Barrel Lenght
TCL7803-CAM-NP-01-KA#XXXX 7/8" Barrel Lenght
TCL11803-CAM-NP-01-KA#XXXX 1-1/8" Barrel Lenght
TCL11203-CAM-NP-01-KA#XXXX 1-1/2" Barrel Lenght
TKEY - Tubular Key

CAM = Replace with cam part number.
XXXX = Keycode assigned from factory.


Image

Slam Latch

  • Picking / bumping, no key way to pick or bump
  • Copying, keys only available through factory.
  • Resistant to glue, dirt, corrosion and other contaminants.
  • Retrofits from any standard cam lock.
  • Custom cam (locking arm) dimensions.
  • 3 different lock sizes available, 5/8″, 7/8″, 1-1/8″.
  • Over 1,500 magnetic locking combinations.
  • Low profile discrete installation.
  • Resistant to magnet tampering.
Buy Now!

7 Pin Tubular Key

  • Key retention prongs.
  • Non key retaining available.
  • Cannot be copied, duplicates only available through factory.
  • Resistant to glue, dirt, corrosion and other contaminants.
  • Custom cam (locking arm) dimensions.
  • 3 different lock sizes available, 5/8″, 7/8″, 1-1/8″.
  • 10,000
Image

Lock Sizes

These locks undergo rigorous security testing to ensure that they are up to par for their job at hand. They have been tested with water, freezing conditions, and also with a large earth magnet, and after each test the lock still functioned perfectly.

Image Image

Cam Options

Straight

Image

Please call us for custom cam sizes

Part Number Lenght (from center of hole) Finish
dcam58 5/8" NP (Nickel Plated)
dcam34 3/4" NP
dcam78 7/8" NP
dcam1 1" NP
dcam116 1-1/16" NP
dcam118 1-1/8" NP
dcam114 1-1/4" NP
dcam138 1-3/8" NP
dcam112 1-1/2" NP
dcam134 1-3/4" NP
dcam178 1-7/8" NP
dcam2 2" NP
dcam216 2-1/16" NP
dcam214 2-1/4" NP
dcam238 2-3/8" NP

Bent

Image

Please call us for custom cam sizes and bends

Part Number Lenght (from center of hole) Bend
dcam78116 7/8" 1/16"
dcam7818 7/8" 1/8"
dcam7814 7/8" 1/4"
dcam7838 7/8" 3/8"
dcam7812 7/8" 1/2"
dcam118116 1-1/8" 1/16
dcam11818 1-1/8" 1/8
dcam11814 1-1/8" 1/4"
dcam11838 1-1/8" 3/8"
dcam11812 1-1/8" 1/2"
dcam112116 1-1/2" 1/16
dcam11218 1-1/2" 1/8
dcam11214 1-1/2" 1/4"
dcam11238 1-1/2" 3/8"
dcam11212 1-1/2" 1/2"
dcam158116 1-5/8" 1/16
dcam15818 1-5/8" 1/8
dcam15814 1-5/8" 1/4"
dcam15838 1-5/8" 3/8"
dcam15812 1-5/8" 1/2"
dcam134116 1-3/4" 1/16
dcam13/418 1-3/4" 1/8
dcam13414 1-3/4" 1/4"
dcam13438 1-3/4" 3/8"
dcam13412 1-3/4" 1/2"